| |
List of updates in En-Track version 6.31.0
|
|
| |
Functionality improvements:
- License requirement removed
- Archive is included in the auto-backup procedure
- The resultscreen in Clientmode can be explicitly turned-off
|
| |
Solved issues:
- Archive is now also included in the database check
|
| |
List of updates in En-Track version 6.30.0
|
|
| |
Functionality improvements:
- Recovery of data after a system crash, enhanced
|
| |
Solved issues:
- The Grafical display of EN-Motion 6 minute Walking test corrected.
- Several minor issues are resolved
|
| |
List of updates in En-Track version 6.29.7
|
|
| |
Functionality improvements:
- Added support for EN-Cardio SteepRamp test (selectable via Default Settings)
- A warning is given when a EN-Cardio VO2 test is written to the CC and no weight is known
- Option added to automatically set all remaining exercises/series as DONE when read from CC (blue -> green ). This option is selectable in Default Settings. Standard value is OFF.
- Support van de latest SRC3311 Reader
|
| |
Solved issues:
- The VO2Max/Kg value in the Test Report is corrected (A comma was missing).
- Import Cliënten function is corrected so it works with a standard Windows 7/8 (64bit) installation.
- Several minor issues are resolved
|
| |
List of updates in En-Track version 6.29.4
|
|
| |
Functionality improvements:
- Support latest version CC readers
|
| |
Solved issues:
- Issue with McAffee 8.8 and switching from configurator to main EN-Track program solved.
- In the case of long periods between making, using and reading the CC, sometimes the current-date was wrongly used.
|
| |
List of updates in En-Track version 6.29.2
|
|
| |
Functionality improvements:
- Start speed of EN-Motion hartrate controlled exercises, is set to 2 km/h
|
| |
List of updates in En-Track version 6.29.1
|
|
| |
Solved issues:
- Target Test value was display wrong in graphic screen.
- Sometimes an Access violation occured after backup was taken. (data is not corrupted but EN-Track had to be restarted)
|
| |
List of updates in En-Track version 6.29: |
|
| |
Functionality improvements:
- Client archive function add
- EN-Track is now Windows 7 32bit/64bit compatible (need full version)
|
|
| |
Solved issues:
- Database Issue concerning EN-Motion data is resolvedsolved.
It is strongly advised to install this version for users of the EN-Motion device |
|
| |
List of updates in En-Track version 6.28
|
|
| |
Functionality improvements:
- Full support of EN-Motion added
rem: When using the EN-Motion, in the Configurator both Exercises as Test templates must be added (previously the test templates came automatic with the exercise templates)
|
|
| |
List of updates in En-Track version 6.27.9
|
|
| |
Solved issues:
- Additional rounding problem solved.
It is strongly advised to install this version for all 6.26, 6.27.x users |
|
| |
List of updates in En-Track version 6.27.8
|
|
| |
Functionality improvements:
- Automatic (on-time) Database backup improved.
Solved issues:
- Multi-selection of exercises (and tests) addition problem (blue arrow)fixed
- Shift-S could close the indication window
It is strongly advised to install this version for all 6.26, 6.27.x users |
|
| |
List of updates in En-Track version 6.27.7
|
|
| |
Functionality improvements:
- Check on DB-available connections improved .
- DB-recovery improved.
Solved issues:
- Internet-license extension problem fixed
- Popup menu and minus- , plus-keyboardbuttons now also controlled by security feature Disabled functions
- Exercise "arrow" selection button could leave de selection list empty (grey)
- Panelresize issues resolved (cosmetic)
- Rounding of force-steps in exercise-edit screen fixed
It is strongly advised to install this version for all 6.26, 6.27.x users |
|
| |
List of updates in En-Track version 6.27.4
|
|
| |
Functionality improvements:
- Manual and Help files uptodate with current software version (NL and GB only)
Solved issues:
- Report of Testdata only showed the first testresult
It is strongly advised to install this version for all 6.26, 6.27.x users |
|
| |
List of updates in En-Track version 6.27.3
|
|
| |
Solved issues:
- Chipcard data was sometimes not read correctly
- When accessing an exercise directly for viewing or editting (via a double-click in the Indication screen) and there where more then one of the same type, it could happen that the other exercise instance was shown
It is strongly advised to install this version for all 6.26, 6.27.1 and 6.27.2 users |
|
| |
List of updates in En-Track version 6.27.2
|
|
| |
Functionality improvements:
- Search time in Client mode optimized
It is strongly advised to install this version for all 6.26 users |
|
| |
List of updates in En-Track version 6.27
|
|
| |
Functionality improvements:
- In Client mode: if an empty or wrongly formatted CC was inserted while the client wanted to create a new card, a message appeared indicating the state of the data on the chipcard. This message is removed.
- In the exercise information screen, the construction of a target value is better displayed. Also the values can be changed directly with short-keys. (read the hints shown for each component, by keeping the mouse pointer still above it)
- Now the backup procedure can be automated completely on a specific time of day without closing EN-Track down. If a backup is possible at that moment (e.g. no other EN-Track PC's active) it will be executed and written into a location which can be specified separately.
- before a backup is started, the possibility is offered to cancel the backup procedure within 5 seconds.
Solved issues:
- If a chipcard is inserted and the reading process fail for some reason (CC dirty), the next time you want to read the CC, the data was "already read". Now the CC can be inserted again an de data read.
- In some configurations, reading of chipcard can result in a system hang. This is solved.
- In clientmode, the screen could be change to a smaller size, and not changed back again.
- On printing or showing of the graphic result screen, a error message could appear "Out of Index" . This is solved.
- Mouse wheel action didn't function properly.
It is strongly advised to install this version for all 6.26 users |
|
| |
List of updates in En-Track version 6.26
|
|
| |
Functionality improvements:
- Administrator rights added. The removal of clients, indications or performed trainings, can be shielded by a password. The same goes for the starting of the configurator. Options can be adjusted in the menu "default settings".
- If a device contained more than 1 exercise definitions, and the device was added to a training, all exercises where added. Now a confimation is needed.
- Search windows is added. When a letter is typed in the clientlist, the search box automatically appears and selects only the clients starting with the letters you typed.
- Percentage of absolute values was adjusted according to male- female- and age-factors. This was unwanted and now its the percentage of the absolute maximum value of the device.
- When the Test/1RM is performed, the percentage between set value and test value is recalculated and shown.
- Group selection is also possible with Client result report.
- With corrupted data on a card, the possibility to whipe the card clean is offered.
- The client group selection, can now be given a name instead of only a number. In the menu Options, a Groups submenu can be found to define the group names.
Solved issues:
- The percentage/force field in the exercise-information dialog sometimes showed wrong values when entered manually.
- Pressing the ctrl-F8 button combination in any other screen then the main screen, cause the main screen to disappear.
- Speed was indicated with Km/u in stead of Km/h.
- In the Indication window data disappeared, when fields where edited and when at the same time a card was inserted.
- If a partially done training (marked blue) was set as DONE, it took a long time before the complete list was re-checked. This is solved.
- The first time a card was read, after starting EN-Track, the client shown was not the client on the card, but the first client in the list. This is solved.
- Dialog message "Exercise not on CC" did not show any client info. Now it does.
- When all exercises on one device where skipped, a wrong message appeared.
It is advised to install this version |
|
| |
List of updates in En-Track version 6.25
|
|
| |
Functionality improvements:
- Support of the new SCM chipcard readers (SCR3311)
- Rotator 2-6 device is added
Solved issues:
- Dimensions of the Cardio Bike result values could be displayed wrong (factor 10x higher)
- After illegal stopping EN-track, the program sometimes doesn't start up again. This is solved in v6.25
It is strongly advised to install this update for 6.24 users !
|
|
| |
List of updates in En-Track version 6.23
|
|
| |
- Several issues concerning report printing and filtering are solved
- After reading training results from CC, the wrong data may be shown. This is the case when the treatment to which the training belongs was not the LAST treatment in the list (note: no data was lost or corrupted, only the wrong training results wwere shown) his is solved in v6.23
It is strongly advised to install this update
|
|
| |
List of updates in En-Track version 6.21
|
|
| |
- EN-Cardio Tests are implemented. Embedded version EN_Cardio Bike v3.0 must be installed.
(nr 0413705 or higher)
Implemented tests are: 12 min. test, 3 min. Test, VO2Max test.
- Through the button "Intake card" a list of all tests performed during the curent indication periode and which have a target value assigned to it.
- Application can now be minized through the Customer and Indication window
- Graphic representation defaults to a line-graph. Unless when only 1 test is perfomed, after which the bar-graph is shown
|
|
| |
List of updates in En-Track version in 6.20
|
|
| |
- By double-clicking on an exercise in the Indication screen, the exercise-edit window is opened
- Indication closure date added t.b.v. test rapport
- Extended Test raports with target values added
- USB/COM port selection upgrade
- EN-Dynamic 1-6 added
- Filter mechanisme extended: selection on performed training date interval and/or deferring target/perfomed values
- French language added
- Network configuration check during startup is updated.
|
|
| |
List of updates in En-Track version 6.13 and 6.05
|
|
| |
- In several reports, the title string was not translated.
- The date in the indicatielist was not according to the Windows date setting but had a fixed format.
- Problem when using EN-Track with Windows XP or 2000 under standard USER priviliges es is resolved.
- Indication name can now contain 80 characters.
Various minor problems solved .
|
|
| |
List of updates in En-Track version 6.12 and version 6.04
|
|
| |
- Network configuration check on startup added
- Database integrity improved
- Sometimes due to an eroneous date in a device, results were not written to the database. This is resolved.
- Problem solved whereby testresults created via the treatment-tab sometimes get mangled when exercises with no tests are present.
Various minor problems solved .
|
|
| |
List of updates in En-Track version 6.11
|
|
| |
- Auto Numlock-On when in Clientmode, is selectable ( menu: Options->General)
- Auto search for chipcardreader on startup is selectable (menu: Options->General)
- Group selection possibility in General Reports (menu: Client)
- Indication name can also be shown in list of indication (right mouse click , indication list)
- An optional message field is added to inform the customer when all exercises where done Ok, when Client mode is activated. (Default settings , third entry line, when empty no message is shown)
Several problems regarding the filter options are resolved.
|
|
| |
List of updates in En-Track version 6.03
|
|
| |
- Auto Numlock-On when in Clientmode, is selectable ( menu: Options->General)
- Auto search for chipcardreader on startup is selectable (menu: Options->General)
Several minor problems are resolved.
|
|
| |
|
|
